1 / 11
Velleman K8200 dual Z motor — image 1
1 / 11

Velleman K8200 dual Z motor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Edit 12/06/19: Added Pictures of the finished solution. I have been looking for a great way to make the Z axel go up…

Rating
0 / 5
Likes
0
Downloads
23
Makes
0
Views
270
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Edit 12/06/19: Added Pictures of the finished solution.

I have been looking for a great way to make the Z axel go up and down.

I have tried a DOZEN designs and none where what I was looking for.

Now I have designed my own one and it is in y sense the best one.

Easy printet, stiff, easy aligned. Almost nothing can go wrong :-)

You need to print 2 of each, but choose if you want TR8 leadscrew or SFU1204 ballscrew.

I have designed it so that you can mount it with the motors up or down as there are monting holes in both ends.

Or why not home to Z_max like a Prusa???

Something that you NEED to have in mind is that the toleranses on this design is TIGHT.

Be sure to calibrate E steps, Flow and horizontal expansion before printing this.

When you have checked it, please do it again...

Otherwise its just to print.

I printed it with 80 mm/sek.

Hope you like it and want to use it.

Print Settings

Printer:

K8200

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

Not impotent

Infill:

40% or what feels right

Filament:

3D Prima PLA


Notes:

Just print it like you want.

I printed with 0.6 nozzle, 4 perimiters and 2mm top and bottom.

40% Gyroid infill.

That is rock solid now.

Only the motor holder needs support for the bottom part, as it have some parts stiffen it up a little.

Category: 3D Printer Parts

Tags