Counting matching models…
This simple construction are for upgrading your K8200/3Drag to GT2 belt on X axis. It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension. For complete upgrade of X axis to GT2, you need:…
This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis. It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension. For complete upgrade of Y axis to GT2, you need:…
40mm fan mount for the All-Metal E3D v6 Hot-End to Velleman K8200/3Drag standard filament extruder. Fan duct snap on reusing original extruder screws and spacers, optimized for robustness and easy print. The 40mm fan is more quit than the…
This is not a mod for the faint of heart, it requires an almost complete disassembly of the printer base frame. And probably a lot of swearing and frustration, but I am quite pleased of how it turned out. I am marking it as a work in…
An K8200 / 3Drag enclosure for the RepRap Full Graphic Smart Controller . It was my design goal to achieve a solution with as few components as possible and preferably without screws. In the design process, my goals were achieved, but the…
30mm fan mount for the All-Metal E3D v6 Hot-End to Velleman K8200/3Drag standard filament extruder. I liked the original fan duct and mount from E3D-Online and wanted the Hot End to mount on the original K8200/3Drag extruder using the…
This is a base setup to create modifications on this printer. I converted many parts from the OBJ model of http://www.thingiverse.com/thing:203292 but, many of them have been measured by hand. It have been made on Catia V5, aprx 20 hours…
This is a K8200/3Drag frame mounting clip with locking screws. It is based on my redesigned of the K8200 Frame Wire Clip On . Next step will be to use the clip in other designs there could benefit from the more secure frame clip. This…
K8200 and 3Drag filament guide with one bearing. The parts can be printed, except for the bearing and the countersink wood/plastic screw 3x25mm. Update: Version for both bearing 6000ZZ and 608ZZ (skateboard bearing). The larger bearing is…
Simple K8200 and 3Drag frame snap on clips to hold the wiring as a replacement for the nylon strips. Based on BVD2e's model http://www.thingiverse.com/thing:444323 with few modifications. Update: Added variant with three profiles and STEP…
Hello dear maker! after a long search on thingiverse i've found this nice fan: http://www.thingiverse.com/thing:814286 . The problem i encountered was, that there wasn't any holder(for a K8200 / 3drag) for this fan at all! So i've decided…
Upgrade parts for the K8200/3Drag extruder to enable use of 3mm flexible filament such as NinjaFlex and TPE (shown in blue). Teflon tube in each part ensures a non stick filament feed. >> If you like it, please leave a like, rating or a…
The original kit has too much wobble on the Z axis, resulting in shifting and uneven layers. This design is for a minimal but rigid Z axis, using a trapezoid lead screw. There are only changes to the original design, where needed. The new…
This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis. It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension. For complete upgrade of Y axis to GT2, you need:…
If you are using the 16T GT2 pulleys on a K8200/3Drag The belts will collide, and the Y belt will rub on the smooth rods of the X axis. To provent this, you can use this mod that raises the Y axis by 12mm. This way the Y belt will be…
I've had some problems with ripples in my prints or even missed steps. After some investigation and experimentation I found out that the reason seems to be the sturdiness of the y-axis linear bearing holders - or rather the lack of such.…
A common Housing for a Velleman K8200/3Drag Controller and a Raspberry Pi with Camera (especially for octoprint) Take the webcam housing and the cover from here: Raspberry Pi Camera Housing Attach controller and Pi with short 3 mm pan…
The end stops for X and Y axis are difficult to adjust as they tend to get loose when unscrewed. The original two screw construction is complicated and I made this simpler "one screw" replacement for the axis. There is no need for precise…
Correct bed leveling is essential for good prints - Marlin firmware now has this awesome feature of measuring the bed and automatically adjusting the Z axis when printing. As this YouTube video demonstrates. I had a small used 8mm…
ClipOn Fan mount for standard 5015s (50x15mm) centrifugal fan used in many 3D printers today (as Prusa i3 MK2). Mount is the blue part on the picture. The cooler fan that comes with the K8200 kit is far from optimal - with unfocused part…
Mounts the Bulldog XL Extruder rock solidly to the Z-bar of the K8200. Inspired by this . I wanted a simple solution that's ridiculously rigid, and at the same time doesn't force you to disassemble the printer; and this is it.…
Completely redesigned in OpenSCAD to lower the base of the hotend and make it easier to fit a slot mount hotend in place of the original Updated to easily switch between 3 and 1.75mm paths, and to replace steep overhangs with small…
This is a mount for a 18mm inductive probe. It will mount the probe behind the extruder using 1x M5 screw and nut, so you will have enough clearance to add whatever you want. Print Settings Printer: K8200 Rafts: No Supports: Yes…
The is a mount for a genuine E3D v6 all metal hotend and E3D Titan extruder for the Velleman K8200 / 3DRAG 3D printer. Only one part is required to mount the hotend and extruder, but I also made a modified mount for the fan duct produced…
What is this? A rig to mount a small 9G RC servo, with an arm mounted Z-endstop, next to the extruder on a K8200/3Drag to enable the Auto bed leveling feature in recent Marlin . I had to modify the probe holder by zenmaster a bit to…
I modified http://www.thingiverse.com/thing:395908 added lightening holes and slot for mounting with clamp Instructions Frame is for mounting left and right, fix with clamps 180x4.5 mm. To mount without any problems at the bar, slightly…
A better fan holder to improve the quality of your 3Drag prints.
The standard 3Drag z-axis endstop is pretty inacurate. Just by moving the screw a little to the side, you'll change it's angle and screw up the z zero position - kind of literally. This improved endstop screw holder let's you place two…
Clip fermacavi per stampante 3d K8200 / 3DRag da: 5 mm 10 mm 15 mm Category: 3D Printer Accessories
This is a small brackets that slides into the Extrusion of a Velleman K8200 or 3Drag 3D printer. Is allows an M3 nut to be inserted into the back and then an M3 bolt to be inserted from the front, allowing accessories to be mounted to the…
