K8200/3Drag TPE and NinjaFlex Flexible Filament - Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrade for the K8200/3Drag extruder to enable use of 3mm flexible filament such as NinjaFlex and TPE.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 306
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Upgrade parts for the K8200/3Drag extruder to enable use of 3mm flexible filament such as NinjaFlex and TPE (shown in blue).
Teflon tube in each part ensures a non stick filament feed.
>> If you like it, please leave a like, rating or a tip... :)
Print Settings
- 0.30mm layer height, 50% infill
- 3 perimeters, 3 top and 2 bottom layers
- No support needed
Post-Printing
Assembly
Teflon tube ID 3.2mm / OD 4.75mm (1/8" / 3/16") is fitted into printed parts and cut to shape.
To give the Teflon tube a tight fit, it will be necessary to clean out the holes with a 4.75mm HSS drill before insertion.
Parts are a direct replacement for the ones in the K8200/3Drag kit.