WS9290 Mammoth Muffler Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fairly heavily modified Mammoth Muffler made to fit the WS9290 instead of the usual 7040.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 249
- Wydruki
- 1
- Wyświetlenia
- 2077
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is still a WIP, CAD will be released when it's more complete.
Bom is also a WIP, you'll basically need everything from the original, and a
34mmOD, 31mm ID, 1.5mm H gasket
use 1mm foam tape to seal around the fan exhaust and the filter's intake
Included are mounts for the usual 3mm back panel, and another for use with the monolith panels.
this works specifically with the WS9290, however if I get the chance, I'll make versions that fit the wm9290 and other models with similar form factors.