Ender 3 - Y Tensioner - 2040 - KAS Derivative
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Revised version of the Y belt tensioner mechanism used by KevinAkaSam in his Dual Y Linear Rail project.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 388
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm in progress of building an Enderwire based on the Ender 3 OG.
I chose not to shift the Y extrusion and instead go with KevinAkaSam's vesion of dual linear rail mod.
On this part, the original could be improved and on that mindset I found Mac's version.
I wanted lateral fixing points - with T-nuts/slide nuts - so I remixed both above mentioned pieces, beefed it up a bit and the result is now attached.
I'll call it a remix since I drew some positions and dimensions from the mentioned items, but otherwise it's built from scratch.
You'll find all parts are in STEP format - feel free to make them better, nicer looking.
I added STLs as well but more so that Printables could display them.
I also put up the 3mf print project - it's set for BL P1S, AzureFilm ASA, 0.16 layer, OrcaSlicer 2.0 RC - testing scarf seams.
Bolts & nuts:
- 2 x GT2 20T Pulley
- 2 x M5 X 35 MM Bolt and lock nut (pulley axes)
- 1 x M5 X 35 MM Hex Head Bolt and lock nut (guide to tensioner knob)
- 6 x M5 X 12 MM button head bolts (body to extrusion)
- 6 x M5 T-Nuts / slide-in nuts
I'll add a couple of photos once it's done printing.