Canon Lens Back Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A back cover to protect the rear lens of a Canon Lens.
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 313
- Wydruki
- 5
- Wyświetlenia
- 886
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
A rear lens cover for Canon Lenses.
If printing on an FDM printer, the Canon logo should be on top. You may want some support material to support the rear side of the internal flat surface. 0.15 mm layer height is ideal.
No support material is needed to support the internal tabs that catch onto the lens. If you're using support material, make sure you set XY separation between an object and its support to ~2mm, so the support material doesn't get stuck around these parts.
Photographed is the 18-55mm kit lens, the top surface of the 3D printed part has been given a rub of sand paper to make it pop!