1 / 13
T-Handles (SAE & Metric) for Allen Hex Wrench Key (25 Sizes) — zdjęcie 1
1 / 13

T-Handles (SAE & Metric) for Allen Hex Wrench Key (25 Sizes)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

T-Handles for metric sets (12 sizes) and for SAE sets (13 sizes). Sizes range from 1.5mm-10mm & 0.050" to 3/8"

Ocena
5 / 5
Polubienia
141
Pobrania
841
Wydruki
5
Wyświetlenia
2326
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Summary: 

Allen Wrench, Allen Key, Hex Wrench, Hex Key…. Whatever you call them, these are the T-Handles for them. The following sizes are available:

Metric:

  • 1.5mm
  • 2mm
  • 2.5mm
  • 3mm
  • 4mm
  • 4.5mm
  • 5mm
  • 5.5mm
  • 6mm
  • 7mm
  • 8mm
  • 10mm

SAE: 

  • 0.050"
  • 1/16"
  • 5/64"
  • 3/32"
  • 7/64"
  • 1/8"
  • 9/64"
  • 5/32"
  • 3/16"
  • 7/32"
  • 1/4"
  • 5/16"
  • 3/8"

 

Print Settings: 

  • I printed with PLA, 0.4 nozzle, 0.2 layer heights, 4 Walls, 20% cubic infill. 
  • Pause on layer 4 of the handles to switch filament for contrasting text on your handle. 
  • I rotated the stems 45 degrees and turned on supports because I was having issues with bed adhesion on the smaller stems. It is a pain to remove supports but a bigger pain to start the print over. 

 

Directions for Assembly:

Thread the stem all the way into the handle to clean up any issues with the threads.

Align the handle, hex key, and stem

Slide the stem on to the hex key and the hex key into the handle. 

Tighten the stem 

 

Tagi