1 / 5
AMD R9 290X TRI-X NOCTUA NF-A12X15 Bracket Mount Holder — zdjęcie 1
1 / 5

AMD R9 290X TRI-X NOCTUA NF-A12X15 Bracket Mount Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prototype version, fits the Sapphire R9 290X Tri-X OC with two Noctua NF-A12X15.

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
264
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Prototype version, fits the Sapphire R9 290X Tri-X OC with two Noctua NF-A12X15. I tried this setup out to reduce noise and improve temps, but the temps increased with 4 degrees Celsius, making the top GPU 94 degrees. Noise was reduced. I put the stock cooler back on the GPU, since it cools better. The brackets screw on the 4 screws that was previously holding the old yellow stock fan case.

Printed mine with 80% infill, holes are for references, drill with 1 or 2 mm drill bits for the stock screws to screw in. Flip the prints to the side to print, without support, without raft or brim.

Tagi