Outlet Cover With Shelf Horizontal Lip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of a horizontal outlet cover with shelf that was a remix of a vertical outlet cover with shelf.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 406
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of a horizontal outlet cover with shelf that was a remix of a vertical outlet cover with shelf. In my remix, I've added a lip to the shelf to prevent things from falling off if clipped in passing. My outlet happens to be at waist height in a high traffic area and so the lip was necessary to prevent outrage in the future.
Support Settings for Cura
- Generate Support: Checked
- Support Structure: Normal
- Support Placement: Everywhere
- Support Overhang Angle: 45.0 (Probably could've done something closer to 80-85)
- Support Horizontal Expansion: 0.8mm
Multi-Color Filament Settings for Cura
Go to Extensions > Post Processing > Modify G Code. From the "Post Processing Plugin" window that pops up, select Filament Change from the drop down menu. If option not listed below, leave unchecked:
- Enable: Checked
- Layer: 55
- Initial Retraction: 15.0mm
- Later Retraction Distance: 300.0mm
- X Position: 25.0mm
- Y Position: 150.00mm
- Z Position: 0.0mm
- Retract method: Marlin (M600 U)
Post-Printing
Support Removal
Very carefully use pliers or snips to rip off all the supports. The print should be rather sturdy so don't worry about breaking it.
