Wheels with Bearings for Formula 1 Kit Card by Mouchiccc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheels for the Formula 1 Kit Card by Mouchiccc but with print in place bearings. Made at 200%.
- Ocena
- 4 / 5
- Polubienia
- 15
- Pobrania
- 113
- Wydruki
- 2
- Wyświetlenia
- 662
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
Print in place bearing wheel made to be printed for a 200% Formula 1 Kit. https://www.printables.com/model/808569-formula-1-kit-card Print 4X of the wheel model for a full set. You may need to use a pick or something to free up the bearing at first in case your printer isnt dialed in. You may want to print one at first and adjust your Slicing Tolerance setting to get it working right. I also used a little bit of model train lube on the bearings. If you want to print this for the original 100% scaled model which was only 3" long you will likely need a 0.1 - 0.2 nozzle.
