Liczymy pasujące modele…
For better seating …. V2.1 Small Clamp has been reinforced
3d printable pocket hole jig for woodworking, use high infill and thick walls to prevent part from buckling when clamping. You can use 688 Bearings or M8/M10 nuts as the drill guide. If you want to use nuts as drill guides use an High…
Simple wall mount to hang a FTX Tracer RC Car on the wall. Printed in PLA at a 0.28 layer height with 20% gyroid infill Should be compatible with the HBX 16889 RC Car as it is very similar. Potential for compatibility with other 1/16th RC…
VW 807688/c - VW Center Armrest Repair Latch Clip Ersatzgriff für Armlehne diverser Modelle aus dem VW Konzern (VW Golf IV; Skoda Fabia,...). For printing rotate the two clips 90° to position them flat on printbed. 2020-05-29: New version…
You can find the BAHA BUG body here . You do not need to scale it up the 1/18 scale fits as in the pictures. I used 10lb velcro and you need to use it sparingly as it is quite strong. Body: Here Buy me a coffee:…
I haven't done much printing, but I found that neither of my printers care for having the timing belt system going. They were both printing like crap, so for an acid test I took this off both any they started printing great again. So at…
My version of the Spool Holder on bearings 608 or 688 8 x M3 nut 8 x M3x16 screw Source: https://www.tinkercad.com/things/jPzRkNIGd98 Print Settings Printer: E-Bot Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: any PETG any…
An enclosure for a JZK HW-688 Buck Converter (24V/12V to 5V 5A USB) Designed to mount on the 4040 profile of an Ender 3 directly underneath the Enders power supply for easy wiring but can also be mounted at the front of the printer next…
This model is compatible with the lego system.
Update 20-02-2022 - now a variant with a stronger foot, as the first design was a little fragile Designed this battery tray, which replaces the existing servo mount. This allows for bigger Lipos to be installed, above the servo. (This…
This is a redesign of the Prusa i3 MK3 Full Bear Upgrade z top supports to accept a 688 bearing. I haven't finished the upgrade yet so the parts haven't been verified for alignment, nor have the clearances been checked. Wanted to get it…
Ho fatto questo modello stampato in PETG con un riempimento del 30%
Printed with PETG, 0.1 mm height, infil 5%, wall 2, top and botton 3 layers. Use Brim.
This is a custom rear mounting bracket for Everbilt drawer rails. This bracket mounts to the rear wall of the cabinet and supports the drawer slides. This works with the D688 series Everbilt Bottom Mount Slide Set which comes in lengths…
Adapter für das Anschließen von eines 35mm Schlauchs und eines HT-Rohrs. Braucht nicht unbedingt Supports, sieht dann aber nicht so gut aus. :D
Hello, this is a small upgrade that the z-axis is holding in the z-axis guide without Wobbling. its easy to print and you can you how good your printer is calibrated :-D make it first over the Bearing and than in the z-axis guide its…
This is a free-standing HEPPA vent to attach to the end of a 4" (101mm I.D.) vent hose for 3D printer & laser engraver enclosures. There is plenty of extra room in the filter compartment for activated charcoal/carbon filter sheets. This…
I modified the Idler to support F688Z Bearing from Ender 3, and enlarged the counterweight for better counterweighting :) I also took the soldering iron holder and base from the below two models:…
Quick and dirty 688 bearing flange to repair a Chinese tumbler. Print them so the bearing (688) press fits in the middle bore. You'll need 3mm cap screws to fit the counterbored holes in order to affix it to something else.
A replacement axle for the Playmobil® Off-Road SUV (6889). Rotate by 90° to print in horizontal orientation, use support! Use sandpaper to grind down if it does not fit 100%. When wheel is sitting in place rotate it a bit until it runs…
This model is compatible with the lego system.
Oil filters are only supposed to be hand tightened, so a PLA tool should be strong enough and you shouldn't need a ½" socket wrench. The main purpose of this tool is to keep the oil that remains above the filter from running down your arm…
The original part has broken twice for me now over two different cars. The only part to fail other than the wing, but the PETG replacement holds up well. Replace the original by unscrewing it, this is easier if you remove the two screws…
I remixed TallackMedia Gridfinity 608ZZ Bearing Holder to hold 28 688zz bearings with both versions the 3u and the 6u Stackable. Both versions have tight tolerance to hold the bearings in place.
Hood seal / Windscreen support. The insert needs to be adjusted with a knife!
My CR10 is a bit modified and the Z steppers have been pushed away a bit from the normal position. This guide allows a wider range of distances but also covers the stock location. Use the bearing (F688ZZ Flanged) and screws (countersunk…
This is a Battery adapter for HBX 16889 RC Car for batteries up to 2A (35x72mm). Printed in PLA (other material might be better suited), 0.3 layer, 15% infill. Remove the Velcro strap from the car, attach the adapter with cable binders…
I designed a cover so that I don't have to remove small stones and dust from my RC car every time. This should help the electronics and mechanics last longer. This cover fits to Blackzon Slyder and should also fit all cars built on the…
This is a case for a Wi-Fi enabled air quality sensor built using a Raspberry Pi Pico W and the Pimoroni BME688 . Both boards must be locked to the bottom part of the case with the included pegs. Lock the Pico with 4x small pegs, and the…
Spacer for the stock of a Beretta 688. Use to extend your length of pull The spacer is 1/4"
Spare part for repair of several Thorens Models. I needed it as spare for the broken original part. Fits Thorens TD280MkIV, TP90, TP50, TP21, TP16MkIII, Genuine Spare Part No. 6886024. You just need to cut M3 threads into the hole, or you…
I designed this plate to upgrade the cheap spring loaded binding post in my Dayton 652-Air speakers. I used Pomona 6883 dual binding posts, but it may fit similar binding posts. (The 6883 has approximately a 3/4" center to center distance…
Simple replacement for the front bumper part. You can use the Fusion 360 file to increase the wall thickness Haiboxing and similar Manufactors should work.
Migrating from thingiverse https://www.thingiverse.com/thing:4600837 Arkon Phone Tablet Mount Slim-Grip Legs SM688 SM060-2 11.5mm wide, glued 1.5mm thick rubber on top. (30mm X 9mm) SM060-2…
Container for BME688e HUZZAH board. There is also a clip to connect a 18650 Lipo to be glued on the top
Ersetzt Teile 142 und 147 aus der Explosionszeichnung der Metabo 1688. Benötigt 2x M6x60 und die dazugehörigen Sicherungsmuttern.
Print on its side for strength, supports will be needed. Go for a shock-resistant filament like PETG and up the wall count. Made for Eachine EC30 but to the best of my knowledge, it will also fit HBX 16889 shocks. Matching shock foot can…
Replacement knobs for the Metabo TK 1685 and TK1688 table saws. The knobs are close to the originals in size and looks. They take m6 bolts or nuts. They probably also fit other Metabo tools from the same era. There are three options. A…
When building https://www.thingiverse.com/thing:4066979 from @mumpitz_82 I ran into two issues: I did not find parts or a desription on how to mount working idlers on the motormount the sketch didn't work because one input pin was…
Stampato in PERG con riempimento 40%
Der Vorbesitzer der Säge hat die Stangen des Schlittens gekürzt und dabei auch die Stopper abgesägt. Ich weiß also nicht, ob die Kappen auch passen, wenn diese noch vorhanden sind. Mache gerne einen Remix mit Aussparungen, falls…
Another spool holder for Creality printers - this one is made to fit two F688zz bearings. Assemble using M8 bolt (50mm long at the very least) and a self-locking nut. My print settings: Printer: Creality K1 Material: PETG/ABS/ASA…
With this you can fit a 688zz bearing into a 608 bearing housing
Presence sensor enclosure for a DF Robot ESP32-C6 Beetle, a C4001 mmWave sensor, and BME688 environmental sensor. It is a little fiddly to get all of the sensors in and solder everything but definitely doable. There is a version of the…
You can use it as a placeholder, spare part or for construct If you need a different shape or sizes, do not hesitate to write them in the comments Done: Form A planned: Form C If needed, simply write the required form in the comments:…
Da Metabo keine Ersatzteile für die 1688 mehr fertigt, habe ich einige Teile neu gestaltet. Zusammen mit einer M6x30 ersetzt dieses Model Teil 56 und 57 des Schiebeschlittens und sichert ihn gegen unbeabsichtigtes Herausfallen.
This model is compatible with the lego system.
These little guys are between $5.00 - $9.00ea usually. This is an alternative. I figured why pay that when you can something similar for free. This can cost upwards of $90 for one pinball machine. Depending how you printer prints you can…
This is a very niche application design, but why not share? Designed for larger rotor or "UFO" style kites, this 3-part hub accepts a 688 bearing by press fitting it into the center sleeve and has two stopper cuffs to keep it in place on…
The case prints best at 0.16 with defaults settings in Prusa Slicer due to the thin grille around the sensor.
This model is a zero clearance block for the fence of the sliding table of the Metabo TK1685/88 table saw. It aims to reduce tearout on crosscuts as it supports the material at the end of the cut. Below an example of a cut in spruce first…
Description Finer the layers the higher the pitch of the wizzzzzz. .16mm with a .4mm nozzles sounds great to me. Bearings will spin faster if you remove some of the grease. A little bit of WD-40 and some heat will cook off most of the…
Wall mountable holder for Wolfcraft 4688000 (90 degree screwdriver adapter)
PETG Recommended.
modified roller for 688 bearring and spacer
Schlüssel um die Düse im Milchsystem ein bzw. auszubauen. Druckdaten für FDM und SLA. Beispiele wurde mit FDM (Prusa MK3) und SLA (Anycubic) gedruckt. Einstellungen FDM: 0.4 er Düse 0.2 mm (0.15 mm) Schichthöhe Infill 50% Druckrichtung…
This is a simple stand designed to prevent the wheels from becoming flat over time. It should fit all RC cars that use the same platform as the HBX 16889. The model can be printed without any supports in 0,2 or 0,25 layer height.
This part is a mold of the inner cavity for a dishwasher's tower protector. https://www.appliancepartspros.com/whirlpool-protector-tower-wp8268825-ap6012262.html You can use this design to make your own piece from or simply as a way to…
This is a replacement for our dishwasher, maybe it could help someone else. Note: Not tested yet, still printing, tested the threads and they fit. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1…
I made the original wheel edge bigger by 3mm in total. So edge 1.5mm bigger.
BASIC MODEL SINCE I COULDN'T FIND IT ANYWHERE POMONA 6883 BINDING POST
Recommend you use .4mm nozzle Requires 4 6x3mm magnets. Magnets are hidden in print but only by a couple layers. This magnet should be strong enough to hold cards, photos, etc.
Popular mechanical key lock in many ATMs and safes: S&G 6880 (and family 6800) - this is optional front cover 6880-511 (this is simple version, without swing cover like 6880-500). Holes should fit in typical safe box with predrilled…
adapter from 688zz bearing to 608 bearing
DE: Adapter für Metabo TK 1685/1688 Tischkreissäge auf Werkstattsauger mit 35mm Anschluß (z.B. Starmix). EN: Adapter for Metabo TK 1685/1688 table saw to shop-vac with 35mm connection (e.g. Starmix). Print Settings Printer brand: Creality…
Gridfinity-based 688 ball bearings bin. Suitable for 42x42 size grids. The size of the bin is 2x3 Grids with a height of 4 units and stores up to 72 pieces.
Remix for newer Meteo Mini board with dimensions 48,4 x 32,9 x 9 mm Original was for 54,5 x 32,9 x 7 mm
Bearings will spin faster if you remove some of the grease. A little bit of WD-40 and some heat will cook off most of the grease. Required parts: 6-10x 688-2RS 8x16x5 bearings 3-6x M3x20mm flat head screws (shorter works but longer…
Central bearing is 608, outer ones are 688. Allows spinning from the edge positions with child or female hand sizes.
This is a very niche application design, but why not share? Designed for larger rotor or "UFO" style kites, this 3-part hub accepts a 688 bearing by press fitting it into the center sleeve and has two stopper cuffs to keep it in place on…
I remixed TallackMedia Gridfinity 608ZZ Bearing Holder to hold 28 688zz bearings with both versions the 3u and the 6u Stackable. Both versions have tight tolerance to hold the bearings in place.
Replacement knobs for the Metabo TK 1685 and TK1688 table saws. The knobs are close to the originals in size and looks. They take m6 bolts or nuts. They probably also fit other Metabo tools from the same era. There are three options. A…
Spacer for the stock of a Beretta 688. Use to extend your length of pull The spacer is 1/4"
Adapter für das Anschließen von eines 35mm Schlauchs und eines HT-Rohrs. Braucht nicht unbedingt Supports, sieht dann aber nicht so gut aus. :D
A 120mm Fan to HEPA Filter Adapter to remove printer fumes, remixed from MQ1991 work here and my work here . MQ1991 model was good but after repeated replacement of the HEPA filter, the plastic taped screw holes began to degrade leading…
Temporary replacement flanged bearing for Creality Cr-5 pro H. -slightly higher tolerance version has an inner diameter of 8.1mm, normal Version is 8.00mm. -much higher tolerance version has an inner diameter of 8.4mm and outer diameter…
This model is compatible with the lego system.
Replaces part no. 126889 for attaching the drawer fronts to the drawer on medium and tall Maximera drawers. Modeled directly off an original part, rails snap in and are held securely like with the original. UPDATE 09/09/2025: Added V2…
I made this remix because the new Ender 3 come with two Bearings F688Z, not the gt2 pulley, so if you use the original body, the belt will rub the aluminium profile, so I model this body lowering the bearings position by 3.5mm, with this…
Einfacher Pulley mit 45 Zähnen für (zwei) 688zz Lager Print Settings Printer: TronXY X5SA Rafts: No Supports: No Resolution: 0.16 Infill: 40% Filament: GST3D PLA+ Category: 3D Printer Parts
This is a filament runout sensor mount for the Sovol SV06 based on the F688ZZ bearing I had lying around. This one fits on top of the z screws of the SV06 but I have been told inserting one there is a bad practice. The sensor attaches to…
Since I don't use the filament spool holder, the 1mm mount was a little weak. So I remixed it to 2mm, everything else is the same.
Simple print, you just need 4 688zz bearings that you push into a roller hole, Did not add holes for screws because i plan to use double sided tape.
components : 688zz bearing (x4) (d8 x D16 x B5) M3x15mm (x12) M3 nut (x12) Print with 10-15% infill and a little support
** THIS IS A VERY ROUGH WORK IN PROGRESS ** I am not an expert in 3D Design by any means, this looks rough, but it works. If you have the skill and would like to remix this so it looks better/preforms better, please do! See new and…
Bei der Säge, die ich gekauft habe, hat das Teil 27 gefehlt. Das gedruckte Teil passt sehr genau. Benötigt Supports. Dieses Teil entspricht nicht den gültigen Normen und ist nur als Vorlage zu sehen, um einen Keil aus Stahl anzufertigen.…
upgraded pin mod to 688ZZ bearings, need nema 17 with 8mm shaft minimum 30mm long
