Cardboard (Polymaker) spool roller wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cardboard spool mount for polymaker spools, integrated rolling function
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to make sure my most used spools were easy to access while not taking up too much space around my printer.
I designed this mount to easily fit the polyterra cardboard spools. they may fit other spool brands.
for each holder the BOM is as follows:
- 1x printed part
- 3x shoulder bolt M6 x 8 (ISO 7379)
- 3x 608 bearing
- 5x nut M6 (DIN 934)
- 2x Screw M6 (protruding between 5 and 8mm from the wall)
See drawing for more details.
This design is made for spools with a hole of Ø55mm and an inner diameter of Ø92mm
The spool will sit 24mm from the wall surface
I have made an extra bowden tube mount (attached as well) for bowden tubes with outer diameter of Ø4mm. The hole should be threaded after printing (M6 i believe)