Cardboard (Polymaker) spool roller wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cardboard spool mount for polymaker spools, integrated rolling function
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 502
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted to make sure my most used spools were easy to access while not taking up too much space around my printer.
I designed this mount to easily fit the polyterra cardboard spools. they may fit other spool brands.
for each holder the BOM is as follows:
- 1x printed part
- 3x shoulder bolt M6 x 8 (ISO 7379)
- 3x 608 bearing
- 5x nut M6 (DIN 934)
- 2x Screw M6 (protruding between 5 and 8mm from the wall)
See drawing for more details.
This design is made for spools with a hole of Ø55mm and an inner diameter of Ø92mm
The spool will sit 24mm from the wall surface
I have made an extra bowden tube mount (attached as well) for bowden tubes with outer diameter of Ø4mm. The hole should be threaded after printing (M6 i believe)