IKEA RATIONELL Damper Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA used to sell those handy screw on dampers for kitchen counter doors until they decided to upgrade the whole…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
IKEA used to sell those handy screw on dampers for kitchen counter doors until they decided to upgrade the whole kitchen to a new hinge system. The current dampers do not fit the older hinges (the new ones clamp on the new hinges). One of my damper housings broke, so I modeled one reusing the internal parts of the broken damper (the adjustment cylinder and screw and the damper+lip).
Note that the baseplate is integrated in my design, before putting in the lip and damper you can screw it directly in the cupboard.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50
Notes:
I only had white in 1.75 so I printed it on the less accurate Anet A8. Will be making more on the HyperCube Evolution and Ultimaker 3 to compare (2.85 mm). Maybe even try a different orientation to print. First prints were with the top side down to the heat bed.
Remove supports with pliers
How I Designed This
I measured the broken piece and modeled it in Fusion 360
Category: Kitchen & Dining