IKEA RATIONELL Damper Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
IKEA used to sell those handy screw on dampers for kitchen counter doors until they decided to upgrade the whole…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 50
- Makes
- 0
- Views
- 466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IKEA used to sell those handy screw on dampers for kitchen counter doors until they decided to upgrade the whole kitchen to a new hinge system. The current dampers do not fit the older hinges (the new ones clamp on the new hinges). One of my damper housings broke, so I modeled one reusing the internal parts of the broken damper (the adjustment cylinder and screw and the damper+lip).
Note that the baseplate is integrated in my design, before putting in the lip and damper you can screw it directly in the cupboard.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
50
Notes:
I only had white in 1.75 so I printed it on the less accurate Anet A8. Will be making more on the HyperCube Evolution and Ultimaker 3 to compare (2.85 mm). Maybe even try a different orientation to print. First prints were with the top side down to the heat bed.
Remove supports with pliers
How I Designed This
I measured the broken piece and modeled it in Fusion 360
Category: Kitchen & Dining