1 / 2
Injection Plunger for Soldering Flux Syringe — zdjęcie 1
1 / 2

Injection Plunger for Soldering Flux Syringe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple piston / plunger to aid pressing the flux fluid out of the syringe. As the syringe was a refill, I had no…

Ocena
0 / 5
Polubienia
6
Pobrania
52
Wydruki
0
Wyświetlenia
388
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple piston / plunger to aid pressing the flux fluid out of the syringe.

As the syringe was a refill, I had no plunjer or original tool to extrude it. Note that the original syringe already has a plug/piston, this design does not replace the plug, it just plugs in :)

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20

Product link

The product link is shown for you to see whether this will fit your syringe, I have no affiliation with the linked website (other than that I spend a lot there... sssssh, don't tell the wife ;)

https://www.aliexpress.com/item/Solder-Soldering-Paste-10cc-Flux-Grease-RMA223-RMA-223/32304283690.html?spm=a2g0s.9042311.0.0.SVFCYr

Category: Parts

Tagi