U.Design - Creality K1 Raiser for custom glass or original lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raiser for the K1 This one is for custom top, glass or pc I also made an adapter so you can use your original lid!
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 181
- Wydruki
- 1
- Wyświetlenia
- 1455
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Another raiser for the k1!!
I wanted a clean raiser with a bit more hight and more room for the cablechain sideways, without sticking out and looking strange…
This one is primarily made for a custom glass or pc top (345x345X4 mm R20 corners), but i also made an adapter so you can use the original lid if you want!
For a glas lid i also include “gaskets” stls for TPU that you can glue in place.
There is a folder with “no logo” stls if you dont like my style :)
BOM
4x original m3 lid screws + 4 more if you use the adapter and original lid.
Glue
Optional: glass or pc lid 345x345x4mm r20 corners
How i printed…
Raiser and adapter
(ABS,ASA) PETG could work also…i hade no problems
3-4 wall
20% Gyroid infill
5 topp/bottom
Custom support standard tight (shown in pics)
all other parts are kind of no brainer… how to setup, place and print.
This raiser is best used in combination with cablechain raiser mods like my chain bracket…
https://www.printables.com/model/676219-adjustable-cablechain-link-for-creality-k1