Skadis DualSense Charger Mount V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to hold the DualSense Charger on an Ikea Skadis Board with/without hooks for power cable management
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 178
- Wydruki
- 2
- Wyświetlenia
- 1122
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I was surprised there was no mount to add a DualSense Charger to the Skadis board so I remixed a wall mount to create one.
There is an STL option with/without cable ties, and I made the dimensions for the Panduit BT1.5M-M 6.3" cable ties, but these can be adjusted in the f3d file.
I included an image from my slicer to show you how I printed. If I had to do it over, I would print hooks side down so any weird textures on the sides of the print wouldn't be seen. Although it would probably take longer and use more filament, if you want a relatively quick print, my option isn't too bad.
V2:
The new V2 has 4 hooks on each corner I found this to be more standard for 3rd party “Skadis style” boards and resist torsion better. I also got rid of the hooks version because it didn't seem like it was being used all that much.