1 / 3
RAK Unify 150x100x45 enclosure plate 18650 battery bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery bracket for RAK Unify 150x100x45 enclosure plate that allows fitting 3 cell 18650 battery packs.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 981
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (32)Powiązane
This is a battery bracket for RAK Unify 150x100x45 enclosure plate. It allows you to fit 3 cell 18650 battery packs like the Adafruit 6600mAh 18650 pack.
Print settings I used on my MK4 with 0.4mm nozzle:
- Print in PETG or ASA if using in an outdoor enclosure as PLA may warp and deform!
- Start with 0.2mm QUALITY preset
- Make sure to place screw legs on plate (it may need to be flipped when imported)
- Set bottom solid layers to 5
- Set minimum perimeters to 3
- Set “Extra perimeters on overhangs” in profile settings to help with overhang floating anchors
CAD done in Onshape. You can view and copy the document here if you want to make your own changes.