Modular Biqu H2 Mount EBB36 adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter nto mount an EBB36 on the Modular Biqu H2 mount for Ender3/CR-10S
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to add a CAN bus for my CR-10S rebuild as with the new cable management, and changing to a Biqu H2, I would have a thick umbilical and not in a good way. However, the EBB42 mount looked to displace the probe mount from this build or the fan mount for a MAD.
The modular biqu H2 mount that this is designed to complement didn't mount the probe in front of the hotend cooling fan and provided a convenient mounting for an adapter to fit an EBB36.
There are two files, one that simply attaches to the original H2 mounting by IBI Productions and a second that replaces it entirely (and changes the screws for the LED lights to suit M2/M2.5.
For the add on clip, you'll need two heatset inserts and M3 x 8mm screws for the mounting holes for the board and one M3 x 6-8mm screw to hold the mount to the top of the original mounting plate.
For the replacement mounting plate you'll need 2 M3 nuts and 2 M3 x 8mm screws to mount the EBB36.
Use a reverse bowden for cable support, and fit your runout sensor at the old extruder mount on your Ender 3/CR10S