Modular Biqu H2 Mount EBB36 adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter nto mount an EBB36 on the Modular Biqu H2 mount for Ender3/CR-10S
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 59
- Makes
- 0
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to add a CAN bus for my CR-10S rebuild as with the new cable management, and changing to a Biqu H2, I would have a thick umbilical and not in a good way. However, the EBB42 mount looked to displace the probe mount from this build or the fan mount for a MAD.
The modular biqu H2 mount that this is designed to complement didn't mount the probe in front of the hotend cooling fan and provided a convenient mounting for an adapter to fit an EBB36.
There are two files, one that simply attaches to the original H2 mounting by IBI Productions and a second that replaces it entirely (and changes the screws for the LED lights to suit M2/M2.5.
For the add on clip, you'll need two heatset inserts and M3 x 8mm screws for the mounting holes for the board and one M3 x 6-8mm screw to hold the mount to the top of the original mounting plate.
For the replacement mounting plate you'll need 2 M3 nuts and 2 M3 x 8mm screws to mount the EBB36.
Use a reverse bowden for cable support, and fit your runout sensor at the old extruder mount on your Ender 3/CR10S