LayersFactory
Zgłoś model
1 / 6
TILT PHONE STAND — zdjęcie 1
1 / 6

TILT PHONE STAND

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

  • Compatible with charger.

  • Added arreting screw. Your phone stand will not ever fall again! 🤯

  • Added support legs for better mobile stability.

  • The gears fit together better, which allows for more comfortable tilting.

  • Smooth design.

  • No gluing is needed here. (Otherwise I made a profile where there are parts with clearance. This version requires the use of glue)

  • Added version with clearance. The guide groove has been enlarged so that free movement is achieved

A VERSION FOR THICKER PHONES - 01_Stand_Wider

The space between the support legs was increased to 14 mm. The charger slot for larger charging connectors was also widened to 15 mm!

A VERSION WITH CLEARANCE

  • It may happen that main version will not be assembled due to small clearances. Actual clearance depends on many factors (flow, filament, printer condition)

  • Parts with the letter C in their name are parts that have increased clearance. These parts must be glued

Tagi

holderdesktopstandsamsunggadgetphonedockminimalistapplesmartphonetiltsmartphoneholderuniversalportableholdersdecorationsmobilephoneholdermobilephoneholderphonestandingtelephoneindustrial