LayersFactory
Report model
1 / 6
TILT PHONE STAND — image 1
1 / 6

TILT PHONE STAND

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Other Gadgets
License
Creative Commons — Attribution — Noncommercial — NoDerivatives
DetailsMakes & commentsRemixesCollectionsRelated

  • Compatible with charger.

  • Added arreting screw. Your phone stand will not ever fall again! 🤯

  • Added support legs for better mobile stability.

  • The gears fit together better, which allows for more comfortable tilting.

  • Smooth design.

  • No gluing is needed here. (Otherwise I made a profile where there are parts with clearance. This version requires the use of glue)

  • Added version with clearance. The guide groove has been enlarged so that free movement is achieved

A VERSION FOR THICKER PHONES - 01_Stand_Wider

The space between the support legs was increased to 14 mm. The charger slot for larger charging connectors was also widened to 15 mm!

A VERSION WITH CLEARANCE

  • It may happen that main version will not be assembled due to small clearances. Actual clearance depends on many factors (flow, filament, printer condition)

  • Parts with the letter C in their name are parts that have increased clearance. These parts must be glued

Tags

holderdesktopstandsamsunggadgetphonedockminimalistapplesmartphonetiltsmartphoneholderuniversalportableholdersdecorationsmobilephoneholdermobilephoneholderphonestandingtelephoneindustrial