1 / 4
World's Best Wooden Train Track Clip for IKEA Lillabo / Brio
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple and sturdy clip that holds together brio-style wooden tracks, useful when building long bridges or slopes.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 1105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (61)Powiązane
There are a bunch of different clips uploaded by other people. I found them very hard to use and too difficult to remove. So I created my own version of the clip that is easy use and remove. It's neither too loose nor too tight and works with long curved tracks. Hold tracks together on carpets too. You can print a whole bunch of these on a single plate.
If you like this model, do consider rating this and uploading a make. :)
V1
- Initial version
V6
- Improved version.
- Slightly longer - Easier to put on and remove from tracks.
Print Settings
- Material: PLA / PETG / ABS
- Layer Height: 0.2 / 0.3
- Orientation: Print on the side / standing up
- Supports: No (but make sure you correctly orient the model on the build plate)