Hinged Magsafe Stand for iPhone / AirPods Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hinged / tiltable / multi-angle update to @Thomas_50404's Magsafe Charger Stand
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 87
- Wydruki
- 2
- Wyświetlenia
- 707
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hinged / multi-angle update to @Thomas_50404's Magsafe Charger Stand
I added a pseudo-ball-and-socket joint / hinge to the arm of the stand that allows users to tilt their phone 25 degrees back and forth while charging.
The hinge pieces are printed separately, and then (CAREFULLY) snapped together. Serious, take care to get everything lined up, or you might crack the outer portion of the top hinge mechanism (I did this twice, and it sucks).
I printed mine with Polymaker Matte White PLA at .2mm.
I found that the coarseness of .2mm actually adds some friction that holds the tilt position better in the middle angles.
You might get more strength in the hinge with PETG, but I haven't tried it yet.
(Ps. I left the original creator's “D” logo on the upper face of the stand because it felt rude to remove - that's not mine)