Schumacher Cougar Classic Oring Battery Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Oring mount for the Schumacher Cougar Classic. Uses the original mounting points, the holes are self tapping, I assume…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Oring mount for the Schumacher Cougar Classic. Uses the original mounting points, the holes are self tapping, I assume the kit wood screws will be fine but I had already replaced with M3 10mm bolts.
You will need a 2mm oring, anywhere between 55 OD to 61OD will be fine. I'd personally recommend 55 if you plan to use a low profile battery and 61 if you want to use a normal shorty. Both will work fine to be honest.
I'd recommend printing with 30+ percent infil and PETG or ABS. I wouldnt trust PLA not to warp when it gets warm in the shell, although theres no hot motor in the shell so might be ok.
Category: R/C Vehicles