Schumacher Cougar Classic Oring Battery Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Oring mount for the Schumacher Cougar Classic. Uses the original mounting points, the holes are self tapping, I assume…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 36
- Makes
- 0
- Views
- 282
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Oring mount for the Schumacher Cougar Classic. Uses the original mounting points, the holes are self tapping, I assume the kit wood screws will be fine but I had already replaced with M3 10mm bolts.
You will need a 2mm oring, anywhere between 55 OD to 61OD will be fine. I'd personally recommend 55 if you plan to use a low profile battery and 61 if you want to use a normal shorty. Both will work fine to be honest.
I'd recommend printing with 30+ percent infil and PETG or ABS. I wouldnt trust PLA not to warp when it gets warm in the shell, although theres no hot motor in the shell so might be ok.
Category: R/C Vehicles