1 / 2

Quadlock Puck with locking mechanism (-WORK IN PROGRESS-)

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quadlack compatible Puck with locking mechanism achived via magnets

Aktualizacja u źródła: 3 maj 2024

Informacje o modelu

tolerances between parts: 0,2mm

Insert the magnets at the right position and orientation so they pull each other

added version 4
- older versions are still online
- changed main format to .3mf (every part is now in one file only)
- printfiles comming soon
new version:
- redesigned to let the mechanism slide on from the bottom → changed the magnet orientation (magnet size stays the same)
- removed lid (now one piece with the quadlock puck)
- advised to print the parts like shown in the foto and with supports only on printbed ( !! avoid tree support !! )
- part variation similar to previous versions:
  - part 1 (green)
    - quadlock puck
  - part 2 (yellow)
    - lock mechanism
future ideas:
- a twist in lock mech to change the magnet orientation back to normal
  because now the magnets dont hold together that good and i dont like the mushy feeling when unlocking

added version 3
- older versions were renamed:
  - V1: first version which didn't acually function
  - V2: new name for V1.5 (old v11 ending)
new version:
- part variation is the same as in V2:
  - part 1 (green)
    - quadlock puck
  - part 2 (yellow)
    - lock mechanism
  - part 3 (red)
    - lid to keep the other 2 parts together
- changed the magnetsize to 5x1 mm magnets
  - reason: to get smaller
  - in one hole there are two magnets
    - in total you need 16 magnets for one puck
  - amazon link: https://www.amazon.de/gp/product/B07T13H3R5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- old lid is compatible with new version
added printfiles
- Infill: 5%
- 0,3mm layerheight
- speed is cranked up a little bit
- Material: PLA
  - nozzle: 215-200°C
  - bed: 70°C
roadmap:
- adding slide mechanism to twist the lid into the puck