1 / 2

Quadlock Puck with locking mechanism (-WORK IN PROGRESS-)

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Quadlack compatible Puck with locking mechanism achived via magnets

Updated at source: May 3, 2024

Model information

tolerances between parts: 0,2mm

Insert the magnets at the right position and orientation so they pull each other

added version 4
- older versions are still online
- changed main format to .3mf (every part is now in one file only)
- printfiles comming soon
new version:
- redesigned to let the mechanism slide on from the bottom → changed the magnet orientation (magnet size stays the same)
- removed lid (now one piece with the quadlock puck)
- advised to print the parts like shown in the foto and with supports only on printbed ( !! avoid tree support !! )
- part variation similar to previous versions:
  - part 1 (green)
    - quadlock puck
  - part 2 (yellow)
    - lock mechanism
future ideas:
- a twist in lock mech to change the magnet orientation back to normal
  because now the magnets dont hold together that good and i dont like the mushy feeling when unlocking

added version 3
- older versions were renamed:
  - V1: first version which didn't acually function
  - V2: new name for V1.5 (old v11 ending)
new version:
- part variation is the same as in V2:
  - part 1 (green)
    - quadlock puck
  - part 2 (yellow)
    - lock mechanism
  - part 3 (red)
    - lid to keep the other 2 parts together
- changed the magnetsize to 5x1 mm magnets
  - reason: to get smaller
  - in one hole there are two magnets
    - in total you need 16 magnets for one puck
  - amazon link: https://www.amazon.de/gp/product/B07T13H3R5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- old lid is compatible with new version
added printfiles
- Infill: 5%
- 0,3mm layerheight
- speed is cranked up a little bit
- Material: PLA
  - nozzle: 215-200°C
  - bed: 70°C
roadmap:
- adding slide mechanism to twist the lid into the puck