Bed Leveling Thumb wheels (Large - TronXY P802-E)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you find this useful, please consider sending a tip. Thanks!https://paypal.me/cdsmakestuff New larger thumb wheel…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
If you find this useful, please consider sending a tip. Thanks!
https://paypal.me/cdsmakestuff
New larger thumb wheel design for my TronXY P802E. (sure it could be used with other things/printers as well).
Appox. 30mm across x 10mm high
Designed to capture an M3 nut for bed leveling.
Suggest to print in PETG, ABS, or similar.
If using the original plexi frame that came in the kit (or other similar printer), the rear clearance slot needs to be enlarged to accommodate the size (see photo). I was able to cut this away using a small, fine tooth hand saw for hobby/craft work.
Can be printed with or without support in the nut capture recess. really depends on your printer capabilities.
Print Settings
Printer:
Artillery Sidewinder X1
Rafts:
No
Doesn't Matter
Resolution:
meduim
20
Filament: any PETG, ABS any
Category: 3D Printer Parts