Dom Foot for T-Track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As many have workbenches and T-tracks are very different, here's a universal solution to connect Dom Foots with T-Tracks
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 90
- Wydruki
- 0
- Wyświetlenia
- 742
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's a way to make the Dom Foot more practical vor anyone using T-tracks.
But there's too many variations in T-tracks so the Dom Foot itself doesn't have a nut, but a hole.
Each part now has a hole to either fit M6 or M8 screws. This way, which ever T-track you are using, just combine the Dom Foot with the slot nut you are using anyway.
Hence that the small tenons combined with the big holes might end up in a very small cross-section. Thereby they it won't take much force to break it. I added these ones anyways, you never know who might need it.
I unfortunately don't have T-tracks (yet), so there's no point in printing for myself.
So I'll stick with the original design. But tell me anything you might need, I'll support. 🖖
To assemble you need ISO 4762 or similar screws and for instance I chose M6x20 and M8x20 for the mortise models. You might need longer screws for the tenon models or other lengths depending on the T-track and slot nut.