Freestanding Mini Kitchen / Desk / Window Shelf Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Identical 20cm high legs for a small shelf which could work in a number of situations.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 270
- Wydruki
- 2
- Wyświetlenia
- 1673
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This small shelf holds my coffee paraphernalia and is comprised of 2 3D printed legs and a plywood board. I attached self adhesive rubber feet to the bottom to prevent any wobbling/sliding.
The legs are 200mm high and have 2 screw holes to affix to a board. The screw holes are 4mm in diameter and the recesses for the screw heads are 9mm diameter so many small wood screws should work.
The plywood I used is 12mm thick, 120mm wide and 520mm long but 18mm plywood will likely work better and you'll be able to use longer screws for sturdier construction.
Both legs are the same, but you'll likely want to have the printbed or top side facing outwards on both ends for consistent aesthetics, depending on your preference.
Printed in PLA at 0.24mm layer height. Ender 3 S1 Pro with 0.6mm nozzle