1 / 2
IKEA SKADIS Prusa Nextruder Nozzle Box holder — zdjęcie 1
1 / 2

IKEA SKADIS Prusa Nextruder Nozzle Box holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a suitable holder for the nozzle box on the Ikea Skadis system.

Ocena
5 / 5
Polubienia
8
Pobrania
25
Wydruki
1
Wyświetlenia
420
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The holder is available in two sizes.

The normal version is for the box with 126 mm width and the large version for 147 mm.

I was able to print them easily with the 0.4 nozzle and 0.2 mm layer height without brim and with just an organic support in the middle.

Maybe some of you can use the model too =)

Tagi