PopCat fume extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fume extractor that looks like the meme PopCat.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 383
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello!
Thanks for choosing my model! This is a fume extractor for when you're soldering. The idea is that the meme PopCat is eating the smoke (you could say he's smoking).
PARTS:
I used a simple 40x40x10 5V fan. Bought it from my local store here. You can find many alternatives. An Ender 3 fan would work fine too, but it's 24v and you might not have a power supply for that.
MODEL:
You only need to print 1 part. It took me only 2 hours to print (your printer may vary). Print the model cat's face down. I also painted it, but that's not necessary. To mount the fan I recommend hot glue, that worked for me. First insert the fan, then glue around it (to not make the fan blades stuck). I also recommend using double-sided tape for the bottom!
I'd appreciate if you would test my model and leave a make! Have a popin' day! 😉