Simple Letter/Box Opener
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very basic letter/box opener design. Can be printed without supports and in a reasonable time.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 239
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple letter/box opener design. The pictured one is the (printed) stl file. The revised file was not printed, but should work just as well. It is about half the thickness on the blade and half the thickness on the handle when compared to the original (printed) design.
***Note: The .3mf and .Gcode files are for the (printed) version only. The revised version does not have .Gcode or .3mf files included.
Printed with generic purple PETG. Used variable infill to make the blade 100% and the handle 15%. Used variable layer height to make the first half of the knife at 0.07 layer height and the rest at 0.24 layer height. No support was necessary. Took about 8.5 hours.