Simple Letter/Box Opener
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very basic letter/box opener design. Can be printed without supports and in a reasonable time.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 23
- Makes
- 1
- Views
- 239
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple letter/box opener design. The pictured one is the (printed) stl file. The revised file was not printed, but should work just as well. It is about half the thickness on the blade and half the thickness on the handle when compared to the original (printed) design.
***Note: The .3mf and .Gcode files are for the (printed) version only. The revised version does not have .Gcode or .3mf files included.
Printed with generic purple PETG. Used variable infill to make the blade 100% and the handle 15%. Used variable layer height to make the first half of the knife at 0.07 layer height and the rest at 0.24 layer height. No support was necessary. Took about 8.5 hours.