1 / 2
Zonestar Z8PM4 Pro PSU dirt shield — zdjęcie 1
1 / 2

Zonestar Z8PM4 Pro PSU dirt shield

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

By design the Z8P has the exhaust fan of its PSU facing the top, where debris and dirt from printing might fall into.

Ocena
0 / 5
Polubienia
0
Pobrania
24
Wydruki
0
Wyświetlenia
193
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I designed this little dirt shield for the Zonestar Z8PM4 Pro (i have the MK2.5 variant, other variants mai work if they have the same PSU at the same place).

The PSU fan is facing up, and the print bed will move over the fan - under certain circumstances debris like lose filament may fall into the psu. To prevent that, i made a cover shield for the PSU. Just print it in one part, and slide it between the PSU and the Y rail. it has its exhausts directed to the side, so the warm air can still escape.

 

If you like you can color the ZONESTAR script in your slicer, let me see those builds!

Tagi