Logitech Wheel Clamp with screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
sturdy replacement in case you lost your clamp and/or screw (doesn't work with the original screw)
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 541
- Wydruki
- 1
- Wyświetlenia
- 2142
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this because i bought a cheap used logitech wheel and it was missing one of the clamps, but i couldn't find a complete replacement to print. remixed Carabryne's model that is perfect to include a screw. i had to make my own because the original is not really print firendly.
print the clamp with tree supports from plate only at 45 degree treshold.
print other stuff with no supports.
use petg or stronger material, 20% infill and 3 walls.
install reinforcers with superglue to the clamp, then glue the handle to the screw.
to install on the wheel: insert from bottom, insert screw, done