42mm driver adapter for the Variable Openmod DIY headphones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter printed in flex/tpu to use 42mm diameter drivers (such as from Sennheiser HD5** series) in the 44mm baffle
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to build the Variable Openmod DIY headphones with drivers/transducers from my sennheiser headphones. The drivers have 42mm diameter and are built into most over-ear headphones in the HD500 series (also Momentum). The drivers don't fit into the 40 mm baffle and they sit too lose in the 44 mm baffle of the Variable Openmod DIY headphones. So i designed this adapter/gasket to be printed in TPU. The drivers sit tightly without being strained.
Printed in ERYONE TPU black, 0.6mm nozzle, 0.15 mm layer height, no supports.