Spool Rim Saver for Kingroon Filament Spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
have your spool got damaged from shipment? and you are using roller system instead of hub spool holder?
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Have you received filament with spool already damaged like these?
=======================================================
For installing on a Kingroon filament spool, you will need:
1.) M3x14 screws - 4/6pcs [or longer if you don't have short one(max 25mm)]
2.) M3 nut - 4/6pcs
=======================================================
Not sure if just me being unlucky or what, about 3 out of 10 filaments(from every shipment/order) I got from Kingroon have different level of crack on the spool. It was not an issue when I was using Ebios Easdry which was hub loaded.
But now I have upgraded to Ebios Polyphemus which uses roller system, cracked spool becomes an issue. I don't want to spend 15-20mins to wind the spools using something like this
So I have draw this rim saver to continue to use back the damaged spools