Spool Rim Saver for Kingroon Filament Spools
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
have your spool got damaged from shipment? and you are using roller system instead of hub spool holder?
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 39
- Makes
- 0
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Have you received filament with spool already damaged like these?
=======================================================
For installing on a Kingroon filament spool, you will need:
1.) M3x14 screws - 4/6pcs [or longer if you don't have short one(max 25mm)]
2.) M3 nut - 4/6pcs
=======================================================
Not sure if just me being unlucky or what, about 3 out of 10 filaments(from every shipment/order) I got from Kingroon have different level of crack on the spool. It was not an issue when I was using Ebios Easdry which was hub loaded.
But now I have upgraded to Ebios Polyphemus which uses roller system, cracked spool becomes an issue. I don't want to spend 15-20mins to wind the spools using something like this
So I have draw this rim saver to continue to use back the damaged spools