G25/27/29 Wheel Direct Adapter (less weight)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
G25/27/29 Family Direct Adapter for aftermarket wheel. The main benefit to use this one is remove some weight to not…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 1092
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
G25/27/29 Family Direct Adapter for aftermarket wheel.
The main benefit to use this one is remove some weight to not force the motors.
Logitech G family was designed to work with original wheel weight and diameter, when put an aftermarket wheel with greater wheel diameter/weight on it, it could decrease the lifetime of motors and circuit.
So I decided to design this one for lighten weight for the motors, since it will not use some parts such as: Intermediate plastic part; circuit board; pedal shift, etc.
For me, when using aftermarket wheel I dont need to use pedal shift, So if you don't need pedal shift and want remove some weight, this one is for you.
Will need
- 6x m5 nuts
Specifications
- Diameter between holes: 70mm
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament: PETG/ABS
How I Designed This
Basically I disassembled my G27 wheel, I used a caliper to measure all and designed it in FreeCAD.
I upload the ".FCStd" file too, it is the editable file to use in FreeCAD.
Category: Games