Saab 9000 tweeter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tweeter mount for DLS tweeter in saab 9000
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Saab tweeter mount
Print settings.
PLA
20% Infill
Support on (I used tree support)
Nozzle temp 215°
Bed temp 50°
I used the DLS Reference RC25 and I think it can be used on many different tweeters.
You need to modify the ventilation pipe on the right side just a little, and I did it whit a heat gun, but it was only a small amount that was needed. I think you can do it whiteout the modification, but I want to make sure it's not in tension. I used hot glue to mount the tweeter in the mount and it worked well.
And I used the one whit 2,7mm holes but I did one whit 3.2mm if you what to use m3 screws whit nuts, I think that will work.
I you have some question you can send me an email on [email protected]