Saab 9000 tweeter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tweeter mount for DLS tweeter in saab 9000
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Saab tweeter mount
Print settings.
PLA
20% Infill
Support on (I used tree support)
Nozzle temp 215°
Bed temp 50°
I used the DLS Reference RC25 and I think it can be used on many different tweeters.
You need to modify the ventilation pipe on the right side just a little, and I did it whit a heat gun, but it was only a small amount that was needed. I think you can do it whiteout the modification, but I want to make sure it's not in tension. I used hot glue to mount the tweeter in the mount and it worked well.
And I used the one whit 2,7mm holes but I did one whit 3.2mm if you what to use m3 screws whit nuts, I think that will work.
I you have some question you can send me an email on [email protected]