Sunlu FilaDryer S2 Kit 4 wide spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those who cannot fit a spool with a width of 84 mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
The spools of the same manufacturer of filament (FDPlast) are different. The new 82 mm spools fit and spin in FilaDryerS2, but the old 84 mm spools do not fit. In order not to spoil the dryer by trimming the plastic, I modeled a kit for lifting the rollers. The rollers themselves are covered with heat shrink. So and rattles less, and the spools does not touch anything. Then I will make a cut sleeve of plastic on the guides.
Because of the complex shape of the dryer I had to make left and right inserts. The spacers are modeled to prevent the guides from falling out.
Spacers at the face side needs to be supported.