60mm PTC/Fan wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
60mm PTC/Fan wall mount
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I built a custom enclosure for my Prusa printers, and with all structural parts printed in ASA, maintaining stable conditions for ASA, ABS and similar materials is now straightforward. Using a DTC2201 temperature controller, the enclosure reaches and holds 55 °C without any issues.
This wall-mount is designed to securely install a PTC heater inside the enclosure while keeping the footprint compact and the airflow unobstructed. All parts are optimized for ASA printing and for use in a high-temperature environment.
Many thanks to @WolfgangWeber_52385 for the original design concept.
The STEP file has been included as requested so you can adapt the mount to your own heater or enclosure dimensions if needed.