House key custom sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable sleeve for common house key. Check my pics of the key dimensions. I noticed a few keys I have require…
- Ocena
- 3 / 5
- Polubienia
- 22
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 759
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Customizable sleeve for common house key. Check my pics of the key dimensions. I noticed a few keys I have require "slight" filing to get a better fit. Looks like there's a small variance between manufacturers.
The top cover gets super-glued into place.
Print Settings
Printer Brand:
FlashForge
Printer:
Dreamer
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.100 is what I used.
Infill:
100%
Notes:
You will need supports for the roof overhang. I printed mine in PLA with good cooling flow, standing straight up, on a piece of blue painters tape. This will give you the most detailed end result. But if you prefer to print it flat and are good at bridging, go for it.
Category: Household Supplies