1 / 7
Bike Radar Mount for Magene (and Garmin Varia)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
aero radar mount for the Magene radar
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 1734
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (28)Powiązane
Print on the flat side. If you use the modifier you can print the part with 1 perimeter and very little infill. Printed mine in CF PETG but anything will work.
To fix the mount screw a M3x20 (DIN 912) hand tight into the mount. Check if the mount is loose while tightening it. Once its fixed stop and DONT OVERTIGHTEN the screw.
You need a Garmin insert. I took mine from an old bike computer mount.
(haven't tested these: https://www.aliexpress.com/item/1005005134362313.html)