1 / 7
Bike Radar Mount for Magene (and Garmin Varia)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
aero radar mount for the Magene radar
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 144
- Makes
- 1
- Views
- 1,745
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Print on the flat side. If you use the modifier you can print the part with 1 perimeter and very little infill. Printed mine in CF PETG but anything will work.
To fix the mount screw a M3x20 (DIN 912) hand tight into the mount. Check if the mount is loose while tightening it. Once its fixed stop and DONT OVERTIGHTEN the screw.
You need a Garmin insert. I took mine from an old bike computer mount.
(haven't tested these: https://www.aliexpress.com/item/1005005134362313.html)