1 / 1
Tapered Drybox Plug for M10 PTFE Passthrough Fittings — zdjęcie 1

Tapered Drybox Plug for M10 PTFE Passthrough Fittings

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This gets a PTFE tube out of a 4L cereal box for a great single spool dry box.

Ocena
5 / 5
Polubienia
19
Pobrania
85
Wydruki
1
Wyświetlenia
547
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is a simple tapered plug designed for the popular 4L food storage boxes found on Amazon and similar places. I used the “Praki” brand, but I'm sure many of them will have the same dimensions.

The plug fits a M10 passthrough fitting for PTFE tube. There are many similar designs already, but I wasn't satisfied with them and did my own. There is a slight taper to provide a good seal, and an extended top grip to make it easy to pull them out.

 

PLA works fine for this, if you want the best possible seal a bit of sanding on the taper will help.

Tagi